Home Inspection in Nagarbhavi, Bengaluru
Nagarbhavi's proximity to Bangalore University has driven dense builder-floor construction on plots originally laid out for single houses. Buildings here are frequently taller and more heavily occupied than the sites were planned for.
What our engineers look for in Nagarbhavi
BDA layout sites redeveloped into three and four unit builder-floor blocks, with substantial student and staff rental demand.
Setback and coverage violations
Buildings extended to the plot edge to maximise lettable area. Beyond the compliance risk, zero setback means no external access for future repairs.
Inadequate stilt parking
Parking provision sized well below the number of units. We check both the count and the structural condition of stilt columns, which take repeated vehicle impact.
Cross-ventilation loss between blocks
Buildings constructed wall-to-wall leave bedrooms venting into narrow gaps. Persistent damp on shared walls follows.
Shared services with no maintenance structure
Small blocks often have no association, so common plumbing, pumps and the terrace are nobody's responsibility until they fail.
Areas we cover around Nagarbhavi
Our Nagarbhavi property inspection team works across these neighbourhoods. Same pricing, same 24-hour report turnaround.
PIN codes served: 560072, 560056, 560091
Home inspection cost in Nagarbhavi
Flat, published pricing — no per-square-foot surprises. Thermal imaging and the RERA rectification letter are included, not billed as extras.
New Home Handover
Pre-possession snag inspection for new Nagarbhavi apartments and villas.
Annual Maintenance
Yearly health check to catch problems while they are still cheap.
Home inspection in Nagarbhavi — FAQs
How much does a home inspection cost in Bangalore?
HomeGyan inspections start at ₹5,999 for new handover and resale properties, and ₹2,999 for an annual maintenance check. Most Bangalore inspection firms charge ₹8,000–₹20,000 for comparable scope. Thermal imaging and the RERA rectification letter are included at no extra cost, not billed as add-ons.
How long does the inspection take and when do I get the report?
A 2BHK apartment takes about 3 hours, a 3BHK or villa 4–5 hours. Your detailed PDF report — photographs, severity ratings and an AI-generated plain-English summary — is delivered within 24 hours of the site visit.
What does the inspection actually cover?
Over 200 checkpoints across structure, walls and ceilings, flooring, doors and windows, electrical systems, plumbing and drainage, waterproofing, kitchen and bathroom fit-out, balconies, and external areas. We use thermal imaging cameras and moisture meters to find defects that are not visible to the eye.
Can I use the report to make the builder fix the defects?
Yes — that is the point. Every report includes a builder rectification letter drafted to reference RERA Section 14(3), which makes the builder liable for structural and workmanship defects for five years from handover. Inspect before you sign the possession letter and your position is considerably stronger.
Do you re-inspect after the builder completes repairs?
Yes, and it is included. Once the builder reports the defects fixed, we return to verify each one and issue an updated report with before-and-after photographs. There is no additional charge for the re-inspection.
Can you inspect for me if I am an NRI or living in another city?
Yes. We run a live video walkthrough so you can see the property in real time and direct the inspector as they go. We coordinate access with the builder or seller directly, and the full report reaches you within 24 hours. You do not need to be in India at any point.