Home Inspection in Sarjapur Road, Bengaluru
Sarjapur Road is Bangalore's fastest-moving construction corridor, with towers being topped out and handed over on compressed schedules. Our inspectors see the signature of speed here: finishing work completed out of sequence, and services commissioned only days before possession.
What our engineers look for in Sarjapur Road
Mostly under-construction and newly completed high-rise apartments, with premium villa enclaves off the main road toward Dommasandra and Attibele.
Incomplete service commissioning
Handovers where the DG backup, water softener or STP feed to the unit has never actually been tested. We run every fixture and outlet under load.
External plaster cracks on new towers
Shrinkage cracks on freshly plastered façades become monsoon leak paths. Best caught in the defect liability period while the builder still pays.
Door and window frame alignment
Rapid carpentry leaves main doors and UPVC windows out of plumb — they close today but jam within a year and let dust and rain past the gasket.
Drainage and chamber slope
Newly laid internal drainage in this corridor frequently has inadequate fall, causing slow-draining bathrooms and utility areas.
Areas we cover around Sarjapur Road
Our Sarjapur Road property inspection team works across these neighbourhoods. Same pricing, same 24-hour report turnaround.
PIN codes served: 560035, 560102, 562125
Home inspection cost in Sarjapur Road
Flat, published pricing — no per-square-foot surprises. Thermal imaging and the RERA rectification letter are included, not billed as extras.
New Home Handover
Pre-possession snag inspection for new Sarjapur Road apartments and villas.
Annual Maintenance
Yearly health check to catch problems while they are still cheap.
Home inspection in Sarjapur Road — FAQs
How much does a home inspection cost in Bangalore?
HomeGyan inspections start at ₹5,999 for new handover and resale properties, and ₹2,999 for an annual maintenance check. Most Bangalore inspection firms charge ₹8,000–₹20,000 for comparable scope. Thermal imaging and the RERA rectification letter are included at no extra cost, not billed as add-ons.
How long does the inspection take and when do I get the report?
A 2BHK apartment takes about 3 hours, a 3BHK or villa 4–5 hours. Your detailed PDF report — photographs, severity ratings and an AI-generated plain-English summary — is delivered within 24 hours of the site visit.
What does the inspection actually cover?
Over 200 checkpoints across structure, walls and ceilings, flooring, doors and windows, electrical systems, plumbing and drainage, waterproofing, kitchen and bathroom fit-out, balconies, and external areas. We use thermal imaging cameras and moisture meters to find defects that are not visible to the eye.
Can I use the report to make the builder fix the defects?
Yes — that is the point. Every report includes a builder rectification letter drafted to reference RERA Section 14(3), which makes the builder liable for structural and workmanship defects for five years from handover. Inspect before you sign the possession letter and your position is considerably stronger.
Do you re-inspect after the builder completes repairs?
Yes, and it is included. Once the builder reports the defects fixed, we return to verify each one and issue an updated report with before-and-after photographs. There is no additional charge for the re-inspection.
Can you inspect for me if I am an NRI or living in another city?
Yes. We run a live video walkthrough so you can see the property in real time and direct the inspector as they go. We coordinate access with the builder or seller directly, and the full report reaches you within 24 hours. You do not need to be in India at any point.