Home Inspection in Vijayanagar, Bengaluru
Vijayanagar is settled west Bengaluru — largely built out by the 1980s and now steadily redeveloping under metro-driven demand. Most of our work here involves buildings between thirty and forty-five years old, an age at which reinforced concrete starts showing its condition honestly.
What our engineers look for in Vijayanagar
Independent houses and low-rise apartments from the 1970s and 80s, increasingly replaced by builder-floor blocks along the metro corridor.
Concrete carbonation and rebar corrosion
At this age, reinforcement inside beams and balcony slabs begins corroding. Rust staining and spalling concrete are the visible stage of a process that started years earlier.
Cast iron drainage stack failure
Original soil stacks crack inside wall chases and leak continuously. The damp gets repainted; the cause does not get fixed.
Narrow-plot ventilation and light
Deep, narrow plots produce middle rooms with no external wall — permanently dark and damp regardless of finish quality.
Redevelopment on original foundations
Builder floors added onto foundations sized for a single storey. We look for the differential settlement that indicates the base is being overloaded.
Areas we cover around Vijayanagar
Our Vijayanagar property inspection team works across these neighbourhoods. Same pricing, same 24-hour report turnaround.
PIN codes served: 560040, 560026, 560079
Home inspection cost in Vijayanagar
Flat, published pricing — no per-square-foot surprises. Thermal imaging and the RERA rectification letter are included, not billed as extras.
New Home Handover
Pre-possession snag inspection for new Vijayanagar apartments and villas.
Annual Maintenance
Yearly health check to catch problems while they are still cheap.
Home inspection in Vijayanagar — FAQs
How much does a home inspection cost in Bangalore?
HomeGyan inspections start at ₹5,999 for new handover and resale properties, and ₹2,999 for an annual maintenance check. Most Bangalore inspection firms charge ₹8,000–₹20,000 for comparable scope. Thermal imaging and the RERA rectification letter are included at no extra cost, not billed as add-ons.
How long does the inspection take and when do I get the report?
A 2BHK apartment takes about 3 hours, a 3BHK or villa 4–5 hours. Your detailed PDF report — photographs, severity ratings and an AI-generated plain-English summary — is delivered within 24 hours of the site visit.
What does the inspection actually cover?
Over 200 checkpoints across structure, walls and ceilings, flooring, doors and windows, electrical systems, plumbing and drainage, waterproofing, kitchen and bathroom fit-out, balconies, and external areas. We use thermal imaging cameras and moisture meters to find defects that are not visible to the eye.
Can I use the report to make the builder fix the defects?
Yes — that is the point. Every report includes a builder rectification letter drafted to reference RERA Section 14(3), which makes the builder liable for structural and workmanship defects for five years from handover. Inspect before you sign the possession letter and your position is considerably stronger.
Do you re-inspect after the builder completes repairs?
Yes, and it is included. Once the builder reports the defects fixed, we return to verify each one and issue an updated report with before-and-after photographs. There is no additional charge for the re-inspection.
Can you inspect for me if I am an NRI or living in another city?
Yes. We run a live video walkthrough so you can see the property in real time and direct the inspector as they go. We coordinate access with the builder or seller directly, and the full report reaches you within 24 hours. You do not need to be in India at any point.